How much gabion stone do you need?
Enter the length, width and height of the wire baskets you are filling. You get tons, cubic yards and truck loads of gabion stone.
You need about
0 tons
0cubic yards
Add your truck size to see loads
for this job
How this was worked out
Assumes gabion stone at 1.4 tons per cubic yard. Other gravel weighs a little more or less, so ask your supplier for their number.
-
About gabion stone
Gabion stone is rock sized to fill gabions, the wire mesh baskets stacked to build walls and line creek banks. Every piece has to be bigger than the holes in the wire, so most of it runs about 4 to 8 inches across. Measure the inside of the baskets as length, width and depth, and the answer is the stone to fill them.
How many dump truck loads do I need?
More about gabion stone
A gabion wall works by weight. Each filled basket is so heavy that it holds back the dirt behind it, and water drains out through the gaps between the stones, so pressure never builds up behind the wall. The same baskets are used as low retaining walls, as stepped walls along a creek and as garden walls and benches.
Set the empty baskets in place on a level, packed base and wire them to each other before any rock goes in. Fill each basket about a third of the way, tie a brace wire from the front face to the back face, then fill the next third and brace again. Hand-place the best-looking stones against the front face and fill the middle with the rest.
Overfill each basket by an inch or two before closing the lid, because the rock settles. Hand-placed stone packs tighter than stone dumped in a truck, so a full basket can hold a little more weight than this page shows. Ask the yard whether their gabion stone is limestone or another rock, since a heavier rock means fewer cubic yards per ton.