How much oversized river rock do you need?
Enter the size of the border, slope or pond edge you are covering. You get tons, cubic yards and truck loads of oversized river rock.
You need about
0 tons
0cubic yards
Add your truck size to see loads
for this job
How this was worked out
Assumes oversized river rock at 1.35 tons per cubic yard. Yard stone runs bigger or smaller from one pile to the next, so ask your supplier for their number.
-
About oversized river rock
Oversized river rock is the big end of the river rock pile, smooth round stones roughly 2 to 4 inches across. It is set one stone deep along beds, pond edges and the sides of a dry creek, where a smaller stone would look lost. Big stones leave big gaps, so a ton of it covers a little more ground than a ton of the regular size.
How many dump truck loads do I need?
More about oversized river rock
These stones were rounded by water over a long time, then dug, washed and screened out of the gravel with the bigger screens. The colors are the same tans, browns, grays and rusts as the regular river rock from the same pit, just in larger pieces. Most yards do not crush it and do not sort it by color.
Lay landscape fabric first, then set the stones by hand or with a small loader bucket, nesting each one against its neighbors so little fabric shows. A layer one stone deep is usually enough; for stones 2 to 4 inches across, measure the depth as about 4 inches. Larger accent boulders, if you want them, are usually sold by the piece and not by the ton.
On a slope, start at the bottom and work up so each stone rests on the one below. Around a downspout or at the end of a drain pipe, the size breaks the force of the water so it does not dig a hole. Rain runs off the smooth faces, and a wet load weighs about the same as a dry one.