How much Alabama sunset pea gravel do you need?
Enter the size of the path, patio or play area you are covering. You get tons, cubic yards and truck loads of Alabama sunset pea gravel.
You need about
0 tons
0cubic yards
Add your truck size to see loads
for this job
How this was worked out
Assumes Alabama sunset pea gravel at 1.4 tons per cubic yard. Yard stone runs bigger or smaller from one pile to the next, so ask your supplier for their number.
-
About Alabama sunset pea gravel
Alabama sunset pea gravel is pea-size river stone, about 3/8 inch, with more color in the mix than plain pea gravel. It is also called rainbow pea gravel or rainbow gravel. Lighter and darker stones sit side by side, so a path or patio has a speckled look up close; look at the pile to see the colors your yard carries. It is soft on bare feet and drains fast, which makes it a good fit for paths, patios and play areas.
How many dump truck loads do I need?
More about Alabama sunset pea gravel
It is screened from the same kind of river gravel as the bigger Alabama sunset, just through the smallest screen, and then washed. Because the stones are small, the mix of colors blends together from a few steps away and reads as a speckle rather than separate colored stones.
For a path, dig out about 3 inches, lay fabric, set a firm edge of steel, timber or pavers, and fill to 2 inches or a little more. The round stones roll, so a path without an edge spreads into the lawn within a season. A thin layer over packed block material or crusher run walks firmer than a deep loose layer.
Under a swing set, the depth needs to be much more than on a path, so check a playground safety guide for the number. Stones this small sometimes end up in a lawnmower, so keep a clean edge where the gravel meets the grass. A wet pile weighs only slightly more than a dry one.