How many bags of concrete do I need?
Measure the slab, pick the bag. You get bags and cubic yards, with extra for waste.
Example numbers. Type your own.
You need about
62 bags of 80 lb concrete
1.36cubic yards
for this job
How this was worked out
- Slab: 10 ft × 10 ft × (4 in ÷ 12) = 33.3 cu ft
- 33.3 cu ft × 1.1 (10% extra for waste) = 36.7 cu ft
- 36.7 cu ft ÷ 27 = 1.36 cu yd
- 36.7 cu ft ÷ 0.60 cu ft an 80 lb bag, rounded up = 62 bags
Bag sizes from the maker's data sheet for plain concrete mix. Bags are rounded up, so you do not come up one short. The 50 lb figure, 0.375 cu ft, is worked out by weight from the 80 lb bag, not read off a bag, so check the bag.
-
Bags by size
Bag Cubic feet each Bags 80 lb 0.60 62 60 lb 0.45 82 50 lb 0.375 98 40 lb 0.30 123
-
About concrete bags
The maker's data sheet for plain concrete mix says an 80 lb bag makes about 0.60 cubic feet of concrete, a 60 lb bag 0.45 and a 40 lb bag 0.30. Some calculator sites use other numbers for the same bag. This page uses the sheet's numbers only, and rounds up to whole bags.
The same sheet says to pour at least 2 inches thick. Patios and walkways are usually 4 inches thick, says the Concrete Network guide, so this page starts on 4.
The extra for waste covers what the plain math misses: the ground under the slab dips in places, the forms bow out a little as they fill, and some always spills. The ready-mix trade group (NRMCA) says to order 4 to 10 percent more than the math. This page starts on 10, the top of that range. Change it to fit the job.