How many bags of sand mix for a thin layer?
Measure the area and pick the thickness, 1/2 to 2 in. You get bags of sand mix, with extra for waste.
Example numbers. Type your own.
You need about
13 bags of 60 lb sand mix
120sq ft to cover
How this was worked out
- 10 ft × 12 ft = 120 sq ft
- 120 sq ft × 0.5 in ÷ 12 = 5 cu ft
- 5 cu ft × 1.1 (10% extra for waste) = 5.5 cu ft
- 5.5 cu ft ÷ 0.45 cu ft a 60 lb bag = 12.22
- 12.22 → buy 13 bags, rounded up
Each figure is rounded to 2 places, and the next line starts from it. Bags are rounded up, so the job does not come up one short. The 80 and 40 lb figures, 0.60 and 0.30 cu ft, are worked out by weight from the 60 lb bag, not read off a bag, so check the bag.
-
About sand mix
Sand mix is cement and fine sand, with no gravel in it. Some bags call it topping mix. With no stones, it can go down thin and still finish smooth.
Use it for layers under 2 in thick: patching chips and low spots, topping a worn step or walk, or resurfacing old concrete. For anything 2 in or thicker, use concrete mix and the slab calculator.
Before you start, sweep and wash the old concrete so nothing loose is left, then wet it so it does not pull the water out of the new layer.
Each bag says how much it covers at a given thickness. Check the bag before you buy.