How much bagged river rock do you need?
Measure the border, dry creek bed or downspout patch you are covering. You get how many bags of river rock to buy.
You need about
0 bags
0cubic feet
0cubic yards
0tons
for this job
How this was worked out
Assumes bagged river rock at 1.4 tons per cubic yard. Bags of the same size weigh more or less with the water in them, so check the weight printed on the bag.
-
About bagged river rock
Bagged river rock is smooth, rounded stone in mixed colors, worn round by water and sold in bags of half a cubic foot. People use it along borders, in dry creek beds and under downspouts where water would wash out mulch. One bag weighs about 46 pounds and covers 2 to 3 square feet.
How many dump truck loads do I need?
More about bagged river rock
Spread river rock 2 to 3 inches deep so the fabric under it stays hidden. At 2 inches a half cubic foot bag reaches about 3 square feet, and at 3 inches only about 2, so a 10 foot border a foot and a half wide takes 5 to 8 bags. The larger the stones in the bag, the deeper the layer needs to be.
This page uses 1.4 tons a yard, the same weight as river rock bought loose, which puts one cubic foot a little over 100 pounds. The weight printed on most bags is closer to 46 pounds, so this page runs a little heavy, on the safe side. Rock does not hold water, so a bag left out in the rain weighs about what a dry one does.
Past about a cubic yard, which is 54 bags, a bulk load of river rock is usually the easier buy and comes in more sizes than the bags. Stone stacks up weight in a car faster than it fills the space, so check the load limit on the sticker inside the driver's door before you load the trunk. Ten bags is already close to 500 pounds.