How much bagged marble chips do you need?
Measure the bed or border you want to brighten. You get how many bags of marble chips it takes.
You need about
0 bags
0cubic feet
0cubic yards
0tons
for this job
How this was worked out
Assumes bagged marble chips at 1.2 tons per cubic yard. Bags of the same size weigh more or less with the water in them, so check the weight printed on the bag.
-
About bagged marble chips
Bagged marble chips are crushed white marble, sharp edged and bright, sold in bags of half a cubic foot. They light up a dark bed, a border along a walk or the ground around a pot. Each bag weighs about 44 pounds, and 2 inches deep is enough to cover the ground.
How many dump truck loads do I need?
More about bagged marble chips
Marble is a form of limestone, and as the chips weather they can make the soil a little less acid (raise its pH). Most shrubs and grasses do not mind, but keep marble away from acid-loving plants such as azaleas and blueberries, or use a different stone in those beds.
At 2 inches deep a half cubic foot bag covers about 3 square feet. This page uses 1.2 tons a yard, close to 88 pounds a cubic foot, which matches the weight printed on most bags. Lay fabric under the chips and edge the bed, since white stone shows every bit of dirt that works up through it and every chip that strays onto the lawn.
A 4 by 10 foot bed at 2 inches takes about 14 bags, more than 600 pounds of stone. That is a heavy load for many cars, so read the limit on the sticker inside the driver's door and make two trips if you must. Once the job passes about a cubic yard, ask a landscape yard whether it sells white marble in bulk before you buy 54 bags.