How much bagged drainage gravel do you need?
Enter the size of the trench, wall backfill or bed you are filling. You get how many bags of drainage gravel you need.
You need about
0 bags
0cubic feet
0cubic yards
0tons
for this job
How this was worked out
Assumes bagged drainage gravel at 1.35 tons per cubic yard. Bags of the same size weigh more or less with the water in them, so check the weight printed on the bag.
-
About bagged drainage gravel
Bagged drainage gravel is plain crushed or mixed stone, sold in half cubic foot bags of about 50 pounds. It goes behind a small retaining wall, into a French drain, under a patio as fill or in a plain bed. Its broken edges lock together, so it packs firmer than round rock.
How many dump truck loads do I need?
More about bagged drainage gravel
Water runs through the gaps between the stones, which is why this is the bag for drainage. Behind a wall, wrap it in landscape fabric so soil does not wash in and clog it. In a French drain, lay a few inches under the pipe and fill around and over it, then cover with fabric before the soil goes back on top.
This page uses 1.35 tons a yard, the weight of #57 stone, which is about 100 pounds a cubic foot. A trench 10 feet long, 1 foot wide and 1 foot deep holds 10 cubic feet, which is 20 bags. Measure the trench after you dig it, since a few extra inches of depth adds bags fast.
A cubic yard is 54 bags, more than a ton and a third of stone, and most drains and wall jobs reach that sooner than people expect. Past about a cubic yard, a bulk load of #57 stone (clean crushed stone about an inch across) from a gravel yard is far less lifting. With bags, a car hits its limit long before the trunk is full, so check the sticker inside the driver's door and split the trips.