How much paint for parking lines?
Count the stalls and set the line. You get gallons of paint, pounds of beads and the accessible stalls the rules call for.
Example numbers. Type your own.
You need about
6.2 gallons of line paint
1,818feet of line
37pounds of glass beads
4accessible stalls, 1 a van stall
for the paint
How this was worked out
- Stall lines: (100 stalls + 1) × 18 ft = 1,818 ft of line
- One gallon: 1,604 ÷ 15 mils = 106.9 sq ft a gallon; ÷ (4 in ÷ 12) = 321 ft of line
- 1,818 ft ÷ 321 ft a gallon = 5.66 gal
- 5.66 gal × 1.1 (10% extra for waste) = 6.23 gal → 6.2 gal
- 6.23 gal × 6 lb of beads a gallon = 37.38 lb → 37 lb
- Accessible: 100 stalls is in the 76 to 100 row of the federal table = 4 accessible stalls
- Van stalls, 1 in 6 rounded up: 4 ÷ 6 = 0.67 → 1 of them a van stall
The thickness is the wet paint, as it goes on. A gallon is 231 cubic inches, so spread 1 mil thick it covers 1,604 square feet. The accessible stalls are the federal minimum.
-
About striping
Paint is measured by how thick it goes on wet, in mils. A mil is a thousandth of an inch. One gallon spread 1 mil thick covers about 1,604 square feet, so a thicker coat paints fewer feet of line.
The 15 mils in the box is the state road spec. Lot paint often goes on thinner than that, so read your can and put its number in the box. Rough old asphalt soaks up more paint than smooth new asphalt, so give it more extra for waste.
Glass beads are dropped into the wet paint so the lines shine back in headlights at night. Put 0 if you leave them out.
A row of stalls has one more line than it has stalls. The accessible stall count is the federal minimum, and the building office has the final say. To work out the paving first, use the parking lot calculator.