Sand topdressing calculator
How much sand to spread over grass, or to fill a low spot a little at a time, with the work shown.
Example numbers. Type your own.
You need about
1.93 cubic yards of sand
2.6 tonsof sand at 1.35 tons a cubic yard
How this was worked out
- Area: 5,000 sq ft
- Layer 1/8 in deep: 5,000 sq ft x 1/8 in / 12 = 52.08 cu ft
- 52.08 cu ft / 27 = 1.93 cu yd
- 1.93 cu yd of sand x 1.35 tons a cubic yard = 2.6 tons
1.35 tons a cubic yard is dry sand (Rutgers). When compost is in the mix, the tons are for the sand only.
-
When to do it
- Bermuda and zoysia: late spring through summer, once the grass has fully greened up and is growing.
- Tall fescue: a light layer only, 1/8 to 1/4 in, with fall seeding. Tall fescue grows in clumps and cannot spread back up through a heavy layer (NC State).
- Topdress within a day or two after core aeration, so the sand falls into open holes (LSU).
What sand
- Match the soil under the grass, or go slightly coarser. Sand much finer than the soil can hold water at the top (Purdue).
- Washed sand, mostly medium to coarse grains, with no more than 20 percent fines, the dust-size grains (Purdue).
- For a golf green, natural sand, not sand made by crushing rock (USGA).
-
About sand topdressing
Cubic yards are the area times the depth: square feet times inches, divided by 12, then by 27. Tons are for the sand only, at the tons per cubic yard in the box.
Safe depths for each pass come from Purdue: up to 1/4 in on a lawn or field, about 1/32 in on a golf green. Clemson puts the most at any one time at 1/2 in.
Aeration hole sand uses the hole share of the surface from the USGA, at holes 3 in deep unless you change it.