How much concrete for a 6x6 slab?
A 6 x 6 ft slab is 36 square feet. Here are its bags and cubic yards, worked out, with the calculator ready if yours is thicker or thinner.
You need about
22 bags of 80 lb concrete
0.49cubic yards
for this job
How this was worked out
- Slab: 6 ft × 6 ft × (4 in ÷ 12) = 12 cu ft
- 12 cu ft × 1.1 (10% extra for waste) = 13.2 cu ft
- 13.2 cu ft ÷ 27 = 0.49 cu yd
- 13.2 cu ft ÷ 0.60 cu ft an 80 lb bag, rounded up = 22 bags
Bag sizes from the maker's data sheet for plain concrete mix. Bags are rounded up, so you do not come up one short. The 50 lb figure, 0.375 cu ft, is worked out by weight from the 80 lb bag, not read off a bag, so check the bag.
-
Bags by size
Bag Cubic feet each Bags 80 lb 0.60 22 60 lb 0.45 30 50 lb 0.375 36 40 lb 0.30 44
-
By thickness, with 10% extra for waste
Thickness Cubic yards 80 lb bags 60 lb bags 40 lb bags 4 in 0.49 22 30 44 5 in 0.61 28 37 55 6 in 0.73 33 44 66
-
About a 6x6 slab
A 6x6 slab covers 36 square feet. Poured 4 inches thick, a 6x6 slab holds 12 cubic feet of concrete, or 0.49 cubic yards with 10 percent extra for waste. That is 22 bags of 80 lb mix, 30 of 60 lb or 44 of 40 lb for the 6x6 size, rounded up to whole bags.
Garage floors and heavy driveways are often 5 to 6 inches thick, says the Concrete Network guide; at 6 inches a 6x6 slab takes 0.73 cubic yards. If that is more than you want to mix by hand, a truck of ready-mix is the other way to fill a 6x6 pour.
If yours is not quite 6x6, type your own length and width in the calculator above.