How much concrete for a 10x10 slab?
A 10 x 10 ft slab is 100 square feet. Here are its bags and cubic yards, worked out, with the calculator ready if yours is thicker or thinner.
You need about
62 bags of 80 lb concrete
1.36cubic yards
for this job
How this was worked out
- Slab: 10 ft × 10 ft × (4 in ÷ 12) = 33.3 cu ft
- 33.3 cu ft × 1.1 (10% extra for waste) = 36.7 cu ft
- 36.7 cu ft ÷ 27 = 1.36 cu yd
- 36.7 cu ft ÷ 0.60 cu ft an 80 lb bag, rounded up = 62 bags
Bag sizes from the maker's data sheet for plain concrete mix. Bags are rounded up, so you do not come up one short. The 50 lb figure, 0.375 cu ft, is worked out by weight from the 80 lb bag, not read off a bag, so check the bag.
-
Bags by size
Bag Cubic feet each Bags 80 lb 0.60 62 60 lb 0.45 82 50 lb 0.375 98 40 lb 0.30 123
-
By thickness, with 10% extra for waste
Thickness Cubic yards 80 lb bags 60 lb bags 40 lb bags 4 in 1.36 62 82 123 5 in 1.70 77 102 153 6 in 2.04 92 123 184
-
About a 10x10 slab
A 10x10 slab covers 100 square feet. Poured 4 inches thick, a 10x10 slab holds 33.3 cubic feet of concrete, or 1.36 cubic yards with 10 percent extra for waste. That is 62 bags of 80 lb mix, 82 of 60 lb or 123 of 40 lb for the 10x10 size, rounded up to whole bags.
Garage floors and heavy driveways are often 5 to 6 inches thick, says the Concrete Network guide; at 6 inches a 10x10 slab takes 2.04 cubic yards. If that is more than you want to mix by hand, a truck of ready-mix is the other way to fill a 10x10 pour.
If yours is not quite 10x10, type your own length and width in the calculator above.