How much concrete for fence posts?
Pick the post, count the holes. The post is taken out of the hole.
Example numbers. Type your own.
You need about
51 bags of 50 lb post mix
0.70cubic yards
1.72cubic feet per hole
for this job
How this was worked out
- Hole: π × (11 in ÷ 2)² × 36 in = 3,421 cu in
- Post: 3.5 in × 3.5 in × 36 in = 441 cu in
- Per hole: (3,421 − 441) ÷ 1,728 = 1.72 cu ft
- 1.72 cu ft × 10 posts = 17.2 cu ft
- 17.2 cu ft × 1.1 (10% extra for waste) = 19 cu ft
- 19 cu ft ÷ 27 = 0.70 cu yd
- 19 cu ft ÷ 0.375 cu ft a 50 lb post mix bag, rounded up = 51 bags
The post is taken out of every hole. Bags are rounded up, so you do not come up one short.
-
About concrete for posts
The starting hole comes from the maker's data sheet for plain concrete mix: dig about three times as wide as the post, and a third of the whole post deep. A post standing 6 feet out of the ground is 9 feet long in all, so its hole starts 36 inches deep. Type your own width or depth and the page keeps it.
The post fills part of every hole, so this page works out the hole, takes the post away, and counts only the space left for concrete. Some post calculators skip that step and come out high. A 4x4 is really 3.5 inches square and a 6x6 is 5.5 inches, so those are the sizes used here.
Post mix here means fast-setting post mix. It is poured dry into the hole around the post, and then water is poured on top. There is nothing to stir in a wheelbarrow, and it holds the post in well under an hour. It comes in a 50 lb bag that fills about 0.375 cubic feet. Plain mix is mixed with water first, takes longer to set, and costs less per hole.
The extra for waste is added before the bags are counted, then the bags are rounded up.
For posts of two sizes, work out each size on its own and add the bags.