How big a hay barn do you need?
Pick the bale, then type how many you store and how high you stack them. You get the floor, a barn size and the eave height for your tallest door.
Example numbers. Type your own.
You need about
30 x 50 ft
1,250sq ft of floor
50bales a layer
14ft eave
Stacked 2 high the bales reach 10 ft, under the 14 ft eave.
Round bales 5 ft across and 5 ft wide, on their sides in rows, 25 sq ft each. Packed tight, with no aisle and no room to drive in. The eave is the top of the wall, where the roof starts: the tallest door plus 2 ft.
How this was worked out
- Bales a layer: 100 bales ÷ 2 high = 50 bales a layer
- Floor: 50 bales x 25 sq ft a bale = 1,250 sq ft
- Width: 1,250 sq ft is over 576 and up to 1,500 sq ft, so 30 ft wide
- Length: 1,250 sq ft ÷ 30 ft = 41.67 ft → 50 ft, the next 10 ft
- Eave: 12 ft door + 2 ft = 14 ft
- Stack: 2 high x 5 ft a bale = 10 ft, under the 14 ft eave, so it fits
Each figure is worked from the one printed before it. Bales a layer and the length are rounded up, so the hay fits.
-
About hay barn size
Round bales lie on their sides in rows, so each one takes its width across by its width on the floor. Square bales lie flat.
This packs the bales tight, with no aisle, no room to drive in and no gap at the walls. Add room if you need it.
The width is 24, 30 or 40 ft by the floor: up to 576 sq ft, up to 1,500 sq ft, or more. That is a rule of thumb. The length goes to the next 10 ft and is never shorter than the width.
The eave is the top of the wall, where the roof starts. The tallest door plus 2 ft is a rule of thumb that leaves room above the door.
Bale sizes vary by baler, so measure one of yours.
Keep hay off the ground and dry. Check the size with your builder before you order.