How many bags of mortar for your wall?
Measure the wall and pick brick or block. You get how many bricks or blocks it takes and the bags of mortar mix to lay them.
Example numbers. Type your own.
You need about
17 bags of mortar mix
540bricks
80sq ft to lay
How this was worked out
- 20 ft × 4 ft = 80 sq ft of wall
- 80 sq ft × 6.75 bricks a sq ft = 540 bricks
- 540 bricks ÷ 37 bricks a bag = 14.59 bags
- 14.59 × 1.1 (10% extra for waste) = 16.05
- 16.05 → buy 17 bags, rounded up
Each figure is rounded to 2 places, and the next line starts from it. Bricks, blocks and bags are rounded up, so the job does not come up one short.
-
About mortar mix
Mortar mix is cement, lime and fine sand, ready in the bag. Add water and it is the paste that holds brick, block and stone together.
The bag says Type S or Type N. Type S is the stronger mix, for walls below ground and retaining walls that hold back dirt. Type N is the everyday mix for walls above ground.
The bag also says how many bricks or blocks it lays. That count is a best case, so buy a little extra. The waste box adds it.
The bricks or blocks a bag lays in the proof lines are worked out, not read off a bag. Check them against the count printed on your bag.
The counts here are for a wall one brick or one block thick, with standard size brick or 8 x 8 x 16 in block. To leave out a door or window, multiply its width by its height and add them up.
For a big wall, masons often mix their own mortar from masonry sand and cement instead of buying bags.