How many tons of asphalt?
Measure the area, set the thickness after rolling and your truck. You get tons of hot mix and the loads.
Example numbers. Type your own.
You need about
15.4 tons of asphalt
133square yards
1truck load, 70% full
150feet one load covers
for this job
How this was worked out
- Area: 100 ft × 12 ft ÷ 9 = 133.33 sq yd
- 133.33 sq yd × 110 lb × 2 in ÷ 2,000 = 14.7 tons
- 14.7 tons × 1.05 (5% extra for waste) = 15.4 tons
- 15.4 tons ÷ 22 tons a truck = 1 truck load, 70% full
- One load: 22 tons × 2,000 ÷ (110 lb × 2 in × 12 ft ÷ 9) = 150 ft at this width
Tons do not change when the asphalt is rolled. Truck loads are rounded up, so you do not come up one short.
-
About tons of asphalt
Hot mix asphalt is sold by the ton. The plant gives its mix as pounds for each square yard laid one inch thick. A typical dense mix is about 110, the number this page starts with. Mixes made to let water drain through run near 90, and heavy base mixes up to about 115, so type the plant's number when you have it.
The thickness is measured after rolling, not loose in the truck. Rolling packs the mix thinner, but the weight stays the same, so the tons you order do not change.
Alabama road plans give asphalt in pounds per square yard, not inches. Type that number in the plan box and the page works out the thickness: 165 pounds at 110 is 1.5 inches.
For an odd shape, work out each rectangle on its own and add the tons.